Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Audi A4?

Model: Audi A4 B9 - Years 2014-2024
Part: Timing belt

The procedure for replacing the timing belt on the Audi A4 involves opening the hood to gain access to the left side of the engine block. Here, any obstructing components and the side protection panel will need to be removed. At this point, the front right wheel can be loosened and the wheel arch can be removed along with it. Once the wheel arch is removed, the central nut of the tensioner pulley can be loosened, reducing the tension on the belt and allowing it to be replaced with a new spare part.

Posted on 23 November 2023 by ScegliAuto

Video tutorial

Related tutorials

When and how to replace the timing belt of the Audi A4 2.0 TDI
When and how to replace the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) In this guide, we will see the useful information for replacing the timing belt of the Audi A4 2.0 TDI; the manufacturer declares that, on this type …
When to replace the timing belt on the Audi A4 2.0 TDI
When to replace the timing belt on the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) In this video we will show you when to replace the timing belt of the Audi A4 2.0 TDI. One of the factors indicating that the timing belt needs to be…
When to replace the timing belt of the Audi A4 2.0 TDI?
When to replace the timing belt of the Audi A4 2.0 TDI?
Audi A4 (2014-2024 / B9) Today's guide will show us some important instructions for replacing the timing belt of the Audi A4 2.0 TDI. On this type of engine, the transmission…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos