Do it yourself
Frequently asked questions about cars and motorcycles

Alternator Replacement Instructions

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Alternator

The alternator is located at the front left of the engine when viewed from the front, but you need to create some working space to remove it. First, open the hood and disconnect the negative terminal of the battery. Remove the plastic cover located on the engine and disconnect the hose attached to the throttle body at the intake manifold. Then, remove the throttle body itself and the corresponding hose to create enough space to loosen the tensioner of the accessory belt, release the alternator pulley, and complete its removal. Follow the reverse order for the installation of the new one.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi Tt (2006-2014 / 8J, MK 2) In this guide, we will see the main instructions useful for disassembling and replacing the alternator of the Audi TT 2.0 TFSI. First, we open the en…
Audi Tt (1998-2006 / 8N, MK 1) The alternator is one of the most important parts of a vehicle's electrical system. It must always be perfectly efficient, as a malfunction could cau…
Audi Tt (2006-2014 / 8J, MK 2) In order to replace the alternator of the Audi TT, you need to open the hood so that you can locate the piece in the lower left side compared to the …

Other guides you may be interested in

How to Replace the Engine Air Filter on BMW 3 Series

How to replace the engine air filter on BMW 3 Series? Let's see how to proceed in this video: open the car door, pull up the engine hood release lever located at the bottom left of the dashboard, and lift the front hood, securing it. Using a screwdriver, remove the air box assembly (where the air filter is located), disconnect the engine air intake hose and the metal clamp pin. Remove the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front hood when finished.

Watch the video!


by ScegliAuto

More videos