Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How to install the xenon headlight kit

Audi A6 - Video tutorial

Model: Audi A6 C6, MK 3 - Years 2004-2012
Part: Xenon headlight kit
Operation: How to install the xenon headlight kit

The video guide shows the assembly of a kit for xenon headlights compatible with the canbus system, to avoid the signaling of anomalies by the car control unit. Once the headlights have been removed, the original lamp is replaced with the one supplied in the xenon kit and the connections to the ballast, the control unit for the new headlights, are prepared. As you can see in the video, the ballast can be installed on the headlight itself. The optical groups are reassembled and the necessary connections are made with the car's electrical system. The operation is neither very complicated nor long, as you can see in the video a little manual skills are enough. In the video the operation is performed on an Audi A6.


Posted on 24 June 2023 by ScegliAuto



After market Xenon headlight accessory kit installation
Audi A6 (1997-2004 / MK 2, C5) For this operation it is necessary to obtain the lamp conversion kit. Open the bonnet and remove the air box to access the headlight assembly screws.
Replacement of the front headlight of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today we will discover the guide that will allow us to disassemble and replace the front headlight assembly of the Audi A6. First, we open the engine
How to replace the headlight bulb on the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) To replace the Audi A6 right headlight bulb, you must first open the hood and remove the air filter box. To do this, it will be necessary to loosen i

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos