Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How to remove the headlights of the Audi A6

Audi A6 - Video tutorial

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Headlight
Operation: How to remove the headlights of the Audi A6

If for some reason you have to remove the front headlights, you should first of all know that you will first have to remove the front bumper; once this procedure has been completed, disconnect the battery and, in order not to subsequently have to adjust the position of the headlights, it is certainly advisable to set references to be reused later in the installation phase of the headlights themselves; then apply some paper tape and draw lines both on the headlight and on the bodywork so as to make them match up during reassembly; to complete the disassembly of the headlights, just unscrew the relative fixing screws and disconnect the power supply socket.


Posted on 30 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos