Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on Audi with Electric Handbrake

Model: Audi Audi Various
Part: Brake pads

Video tutorial

On many models of the VAG group (Volkswagen, Audi, Seat, Skoda) equipped with an electric handbrake, to replace the rear brake pads, you should use diagnostic equipment to release the handbrake; an alternative is to use a battery (a 9-volt battery will suffice) to power and operate the motor to disengage the handbrake; after the normal replacement of the pads by removing the brake caliper from its support, simply reverse the polarity to reinsert it; proceed in the same way on the other brake caliper; before driving, it is advisable to perform several engage and disengage operations of the handbrake using the appropriate button.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads with Electric Handbrake on Audi Vehicles
Replacing Rear Brake Pads with Electric Handbrake on Audi Vehicles
Audi Audi Various To replace the rear brake pads on an Audi vehicle equipped with an electric handbrake that locks the rear caliper, it is necessary to unlock the brak…
Steering Wheel Removal on Audi Cars
Steering Wheel Removal on Audi Cars
Audi Audi Various Lower the steering column using the lever located under the steering wheel. Remove the cover located behind the steering wheel by prying in the centr…
How to replace the license plate light bulb of the Audi.
How to replace the license plate light bulb of the Audi.
Audi Audi Various All the bulbs installed inside the vehicle can be replaced in case of malfunction. To replace the license plate light of a vehicle in the case of our…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos