Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shocks on an Audi A4 B6

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Shocks

See other generations:
Video tutorial

Replacing the rear shocks on this car model is fairly simple since you can perform the entire operation from the outside without accessing the trunk. Start by lifting the vehicle on a lift and removing the rear wheel for better maneuverability (though this step can be skipped).

Then, remove the lower shock eyelet mounting bolt and apply a support jack. Remove the wheel well cover to access the upper mount and complete the disassembly.

Attach the mount to the shaft of the new shock and proceed in reverse for installation.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Shocks on Audi A4
Replacing Rear Shocks on Audi A4
Audi A4 (2004-2008 / B7) In this video tutorial, you will learn how to remove the rear shocks from an Audi A4. First, lift the vehicle and remove the rear wheel by loosening …
How to Remove the Rear Seats of the Audi A4
How to Remove the Rear Seats of the Audi A4
Audi A4 (2000-2004 / B6) Today's instructions will show you how to remove and possibly replace or repair the rear seats of the Audi A4. First, open the rear doors and start u…
How to Remove the Rear Seats of the Audi A4
How to Remove the Rear Seats of the Audi A4
Audi A4 (2004-2008 / B7) Follow these steps to remove the rear seats of the Audi A4. First, open both rear doors and start by unfastening the rear bench seat by pulling it up…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos