Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Glove Compartment of an Audi A3 8P

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Body

See other generations:
Video tutorial

In this video, you will see how to repair the glove compartment of an Audi A3 8P. In this case, there is significant damage as the plastic hinge has broken in half, making repair kits found on Amazon ineffective. You will need to completely disassemble the drawer and remove it from its housing to find the cause of the drawer's failure, which is the internal piston that no longer slides as it should.

Remove it, and to reduce the force of the piston, the YouTuber tries making small holes in the cover, but it doesn't work. Then, he disassembles the piston and decides to make small cuts around the internal seal, and this time the result is satisfactory.

Refit the piston, and then you can re-glue the hinge, which will now hold securely.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment of an Audi A3
How to Remove the Glove Compartment of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the glove compartment located in the cabin of an Audi A3. Open the glove compartment and pull the side plastic cover using a leve…
How to Replace the Glove Compartment in an Audi A3
How to Replace the Glove Compartment in an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) To replace the glove compartment in the Audi A3, detach the panel on the side of the dashboard, which can be accessed by opening the passenger door. …
How to Remove the Glove Compartment of the Audi A3?
How to Remove the Glove Compartment of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To remove the glove compartment of the Audi A3, loosen the two bolts located just below the compartment. Then, open the compartment to access and rem…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos