Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the interior rearview mirror of the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Rearview mirror

To replace the interior rearview mirror of the Audi A3, you need to pry with an object in order to detach the internal fastening clips that hold the mirror to its housing: once it has been detached from its seat, you can disconnect the underlying connector attached to the mirror. Once this is also disconnected, you can completely remove the mirror from its seat, inserting the new replacement piece: this must be connected to the connector and secured in its seat with the appropriate clips.

Posted on 18 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the internal rearview mirror of the Audi A3
Replacement of the internal rearview mirror of the Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) Today we will see the process of disassembling and replacing the interior rearview mirror of the Audi A3. First of all, we get into the cabin and sta…
Replacing the External Wing Mirror of an Audi A3
Replacing the External Wing Mirror of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the external wing mirror (passenger side) of an Audi A3? Follow these steps. Using a plastic or rubber lever, pry between the peri…
How to Replace the Interior Rear View Mirror on Audi A3
How to Replace the Interior Rear View Mirror on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial, you can see how to replace the interior rear view mirror on the Audi A3 by following some simple steps: the first thing to do…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos