Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to remove the rear bumper on the Audi A3?

Audi A3 - Video tutorial

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Rear bumper
Operation: How to remove the rear bumper on the Audi A3?

In this tutorial we can see how to remove the rear bumper on the Audi A3, a very simple and quick operation. First of all, go to the back of the vehicle, then open the trunk door, remove the internal covers of both headlights and, by unscrewing the respective bolts, remove them. Then unscrew the screws accessible from inside the wheel arches, continue with the screws on the lower inner edge of the trunk and separate the bumper from the frame by pulling it outwards. To install the replacement, simply follow the reverse procedure.


Posted on 20 April 2024 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos