Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi A4 remote control?

Model: Audi A4 B9 - Years 2014-2024
Part: Key

In this tutorial, we can see how to replace the battery of the Audi A4 remote control, an extremely simple and fast operation. To do this, we will need a replacement battery of type CR2032. First, we grab the remote control from the plastic half, then we press the two buttons on the sides of the metal area and remove the emergency key. We then repeat the operation for the indicated plastic element, remove the tray, and proceed with the battery replacement. At this point, all that's left is to reassemble everything following the reverse procedure.

Posted on 14 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Audi A4 key remote battery
Replacement of the Audi A4 key remote battery
Audi A4 (2014-2024 / B9) Today's step-by-step instructions will show us how to disassemble and replace the battery of the key remote for the Audi A4. First, we take our remot…
How to replace the battery of the Audi A4 remote control
How to replace the battery of the Audi A4 remote control
Audi A4 (2004-2008 / B7) Today's instructions will show us the necessary steps on how to disassemble and replace the battery of the key remote for the Audi A4. First, we take…
How to replace the battery in the Audi A4 remote control.
How to replace the battery in the Audi A4 remote control.
Audi A4 (2014-2024 / B9) With the help of this short video tutorial, we will show you how to disassemble the remote control to replace the battery. Press on the side of the r…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos