Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to recalibrate the rear glass in an Audi?

Model: Audi Audi Various
Part: Side window

In this tutorial, we can see how to recalibrate the rear glass in an Audi, an extremely simple and fast operation to be carried out, for example, after replacing the battery. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel, it is not necessary to start the engine. Next, close the window in question, hold down the close button for 4 seconds and then open it. At this point, hold down the open button for another 4 seconds, check that the procedure was successful, and, if necessary, repeat it for the remaining windows.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in an Audi?
How to reset the tire pressure light in an Audi?
Audi Audi Various In this tutorial we can see how to reset the tire pressure warning light in an Audi, an extremely simple and quick operation, to be done only once th…
How to reset the MMI on an Audi.
How to reset the MMI on an Audi.
Audi Audi Various If we are experiencing some malfunctions with the multimedia system of this car model, in the following description we can find all the steps and rel…
How to replace the battery of the Audi remote control?
How to replace the battery of the Audi remote control?
Audi Audi Various Replacing the remote control battery of an Audi is very simple, we can see how from this video guide valid for all recent models of the German house.…

Other guides you may be interested in

Removing VW Passat Interior Lights

Below is how to replace the bulbs in all the interior lights of this vehicle. For the lights on the roof, use a flathead screwdriver to gently lever at the side where you will release the retaining clip, pull it out, and after replacing the bulb, press it back into place. For the light above the front seats, lever (with the flathead screwdriver) directly on the transparent plastic to detach it from the retaining tabs (replace the bulbs and press it back into place). For the rear light and number plate lights, perform the same operation: lever to release the tab, replace, and press back into place.

Watch the video!


by ScegliAuto

More videos