Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi vehicles' remote control

Model: Audi Audi Various
Part: Key

Audi A series vehicles use the same remote control to open and close the vehicle; this allows us, in case the battery is low, to perform the same steps to replace the battery. To replace the key battery, we need to insert a flat-head screwdriver into the side in order to apply slight pressure that will allow us to separate the top from the bottom. We use the same screwdriver to open the bottom part of the remote control in two pieces and remove the old battery. We install the new battery and close the bottom part, put the two parts together and test the remote control's functionality.

Posted on 3 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi remote control.
How to replace the battery of the Audi remote control.
Audi Audi Various Today we will explain how to replace the battery in the remote control of the Audi Q5 vehicle. To perform the battery replacement, we need to lift th…
Replacement of the battery for the remote control of the 2015 Audi.
Replacement of the battery for the remote control of the 2015 Audi.
Audi Audi Various The battery that powers the remote control that opens and closes the doors of Audi cars produced around 2015 eventually runs out and needs to be repl…
How to Replace the Remote Control Battery on an Audi?
Audi Audi Various Replacing the flat battery in an Audi remote control is very simple; let's see how to proceed in this tutorial, applicable to many models from the Ge…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos