Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery for the remote control of the 2015 Audi.

Model: Audi Audi Various
Part: Key

Video tutorial

The battery that powers the remote control that opens and closes the doors of Audi cars produced around 2015 eventually runs out and needs to be replaced. To do this, we turn the remote control with the buttonless side facing towards us, press on the lever found in the chrome section and remove it, firmly grip the exposed shaft and pull to remove the battery housing.

Remove the old battery and replace it with a new CR2032, paying attention to the correct positioning, insert the housing into the body of the remote control and reinsert the chrome part with the key blade in its place.


Posted on 15 March 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Audi remote control.
How to replace the battery of the Audi remote control.
Audi Audi Various Today we will explain how to replace the battery in the remote control of the Audi Q5 vehicle. To perform the battery replacement, we need to lift th…
How to replace the battery of the Audi vehicles' remote control
How to replace the battery of the Audi vehicles' remote control
Audi Audi Various Audi A series vehicles use the same remote control to open and close the vehicle; this allows us, in case the battery is low, to perform the same ste…
How to Replace the Remote Control Battery on an Audi?
Audi Audi Various Replacing the flat battery in an Audi remote control is very simple; let's see how to proceed in this tutorial, applicable to many models from the Ge…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos