Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the motor oil and oil filter of the Audi A5 3.0 TDI V6.

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Engine oil

These short and simple instructions will show us how to replace the motor oil and oil filter of the Audi A5 3.0 TDI V6. First, lift the car and start unscrewing the oil drain bolt located under the engine, letting it drain into a container for about ten minutes; then, unscrew the oil filter cartridge found on the top, using a socket wrench, as shown in the video. At this point, install the new oil filter, replacing the small gasket, and finally pour in the new motor oil!

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to check the engine oil level of the Audi A5
How to check the engine oil level of the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) We will see below the instructions which will allow us to check the engine oil level of the Audi A5, but also of the Q5. First of all, we get on boar…
Replacement of Engine Oil
Replacement of Engine Oil
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Changing the oil is very important to avoid problems with your car, so you should constantly check the oil level. To change it, lift the car with a j…
How to reset the oil light on the Audi A5 2011
How to reset the oil light on the Audi A5 2011
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In this new mini-guide dedicated to your Audi A5 first series (year 2011) we're going to find out how to manually reset the engine oil warning light.…

Other guides you may be interested in

How to Remove the Window Regulator Motor from a Volkswagen Touareg

Learn how to remove the door motor from a Volkswagen Touareg. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover, then unscrew the screws inside with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the door panel by hand, then use a screwdriver or power screwdriver to unscrew the fastening screws of the door actuator motor. Disconnect the various power terminals and replace it with a new one. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos