Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Clock on the Benelli TnT 125?

Model: Benelli Tnt 125
Part: Clock

Video tutorial

To set the clock on the Benelli TnT 125, turn on the instrument panel by inserting the ignition key into the corresponding slot: then press the button at the top left of the panel until the word "Total" appears. At this point, hold the button for about three seconds until the hours start to flash: now use the button at the bottom left to adjust the hours and then switch to minutes by pressing the top left button again.

The minutes can be adjusted in the same way, confirming with the top button.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
Tnt 125 Changing the engine oil in a Benelli TNT 125 is an extremely simple and quick task. First, ensure the engine is cool enough. Then, position a contain…
Tnt 125 In this guide, we will look at the procedure to remove and replace the air filter of the engine on the Benelli TNT 125 motorcycle. First, remove the …

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos