Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the engine oil on the Benelli TnT 125 can be carried out by loosening the drain plug located at the bottom center of the oil pan, that is, in the central lower part of the motorcycle: once this plug has been removed, it will be possible to drain all the used oil into a properly positioned container. It will now also be possible to remove the oil filter, located in the lower part of the vehicle; then it will be possible to top up. The necessary amount of oil must be inserted through the vent located on the right side of the vehicle.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace Engine Oil and Oil Filter on Benelli TNT 125
Replace Engine Oil and Oil Filter on Benelli TNT 125
Tnt 125 In this video, learn how to replace the engine oil and oil filter on a Benelli TNT 125, performing the regular maintenance service. First, warm up th…
How to Change the Engine Oil on the Benelli TNT 125
How to Change the Engine Oil on the Benelli TNT 125
Tnt 125 This guide will show you the procedure necessary for changing the engine oil during the regular maintenance service of the Benelli TNT 125. First, pl…
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 Engine oil, along with the oil filter, should always be replaced at regular intervals to ensure proper engine function; here’s how to service the Ben…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos