|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 125
The exhaust installed on the Benelli TnT 125 can be replaced by loosening the screw that fixes it to the respective support at the top, at the rear of the motorcycle. Then it will be possible to loosen the screw that secures the ring that connects the exhaust to the remaining part of the exhaust pipe: once the exhaust is freed, it will be possible to completely remove it and install the new one. The new one must be fixed with the screw at the top on the support and connected to the exhaust pipe through the ring.
Posted on 17 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Tnt 125
The procedure for replacing the exhaust on the Benelli TnT 125 involves loosening the bolt that secures the exhaust to the corresponding support on t…
Tnt 125
To replace the exhaust on the Benelli TnT 125, loosen the bolt that secures the exhaust to its mount at the top, near the rear of the motorcycle. Nex…
Tnt 125
The replacement of the muffler installed on the Benelli TnT 125 can be carried out by loosening the bolts that fix it to the respective support at th…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |