Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the muffler installed on the Benelli TnT 125 can be carried out by loosening the bolts that fix it to the respective support at the top, at the rear of the vehicle. Then it will be possible to unscrew the fastening screw of the ring that connects the muffler to the other part of the exhaust pipe: once the muffler has been freed, it can be completely removed and the new one can be installed. The new muffler can be fixed with the screw at the top on the support and connected to the exhaust pipe with the corresponding connecting clamp.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Benelli TnT 125
Tnt 125 To replace the exhaust on the Benelli TnT 125, loosen the bolt that secures the exhaust to its mount at the top, near the rear of the motorcycle. Nex…
How do you replace the exhaust pipe of the Benelli TnT 125?
How do you replace the exhaust pipe of the Benelli TnT 125?
Tnt 125 The procedure for replacing the exhaust on the Benelli TnT 125 involves loosening the bolt that secures the exhaust to the corresponding support on t…
How to Reset the Engine Light on a Benelli TNT 125
How to Reset the Engine Light on a Benelli TNT 125
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos