Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Imperiale 400
    4. : Removing the clutch cable on Benelli Imperiale 400

Model: Benelli Imperiale 400
Part: Clutch
Removing the clutch cable on Benelli Imperiale 400

For the job you will need: two 12 mm wrenches, two 4 and 6 mm Allen wrenches, a mm socket and T wrench and a 14 mm ratchet socket, finally a Phillips screwdriver. Unscrew the bolts that fix the saddle laterally, then unscrew the two central bolts now uncovered with an Allen key. Remove the fairing covering the tank from its seat and disconnect all its cables. Unscrew the cable attachment using the two wrenches, remove the gasket and the bottom nut. Pull it out and slide it out, then loosen the adjustment wheel located near the clutch lever. Remove it completely.


Posted on 20 January 2024 by ScegliAuto



How do you replace the battery of the Benelli Imperiale 400?
Imperiale 400 In order to replace the battery of the Benelli Imperiale 400, you have to open the cover located on the right side of the bike, immediately under the
How do you replace the spark plug of the Benelli Imperiale 400?
Imperiale 400 In order to replace the spark plug of the Benelli Imperiale 400, it is necessary to identify the side cable of the motorcycle which is connected to t
Fit leg protector on Benelli Imperiale 400
Imperiale 400 Do you like motorcycles but do you sometimes feel too dangerous to ride them? Are you a lover of safety as well as adrenaline? Today a short tutorial

Replacement of the rear brake pads of the Suzuki GS 500

Let's see in this short and simple guide, the instructions on how to disassemble and replace the rear brake pads of the Suzuki GS 500 motorcycle. First we put our motorcycle on the central stand and start unscrewing the fixing screws of the rear brake caliper, removing it from the disk; then we press the caliper piston to make it retract, removing the old pads, as shown in the video. At this point we clean the caliper from the residual dirt, thus installing the new brake pads (of excellent quality); then we reassemble the brake caliper!

Watch the video!


by ScegliAuto

More videos