Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the battery from a Benelli TNT 125

Model: Benelli Tnt 125
Part: Battery

Video tutorial

Before you begin, it is advisable to position your Benelli TNT 125 upright. Start by unfastening and removing the rider's seat using the ignition key. Then, remove the passenger seat by unscrewing the relevant fixing bolts.

This will give you access to the battery. Proceed to disconnect the battery terminals by loosening the corresponding fixing screws.

After this, remove the air filter by unscrewing the fixing screws. At this point, disconnect the battery connector, then unscrew and remove the bolt that secures the battery holder.

Once you have completed this last step, you can remove the battery, and you will have finished the removal.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Light on a Benelli TNT 125
How to Reset the Engine Light on a Benelli TNT 125
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
Battery Replacement for Benelli TNT 125
Battery Replacement for Benelli TNT 125
Tnt 125 In this video tutorial, you will learn how to remove and replace the battery of a Benelli TNT 125 in a few simple steps. First, remove the screw from…
Battery Replacement on the Benelli TNT 125
Battery Replacement on the Benelli TNT 125
Tnt 125 Today, in this tutorial video, learn how to remove and replace the battery on a Benelli TNT 125 motorcycle, following these simple steps. First, remo…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos