Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlight Bulb on Benelli TRK 502

Model: Benelli Trk 502
Part: Headlight bulb

Video tutorial

In today's video, we will see how to remove and replace the front headlight bulb on a Benelli TRK 502 in simple and quick steps. First, position your motorcycle on the centre stand and start by removing the plastic protective cap of the bulbs; then remove the metal clip and disconnect the electrical connector of the bulb to take it out. Replace the bulb with a new one of the correct type (in this case, H7); then refit everything by inserting the bulb into the headlight and sealing it with the rubber cap.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on Benelli TRK 502
Replacing the Front Headlight Bulb on Benelli TRK 502
Trk 502 Replacing one of the front headlight bulbs on the Benelli TRK 502 is very simple, and here’s how to do it. With the motorcycle turned off, turn the h…
Replacing the Front Headlamp Bulb on a Benelli TRK 502
Replacing the Front Headlamp Bulb on a Benelli TRK 502
Trk 502 In this brief and simple guide, learn how to remove and replace the front headlamp bulb on the Benelli TRK 502 motorcycle by following the instructio…
How to Replace the Headlamp Bulb on a Benelli TRK 502
How to Replace the Headlamp Bulb on a Benelli TRK 502
Trk 502 To replace the headlamp bulb on your Benelli TRK 502, unscrew the screws securing the front fairing from the inside, directly behind the handlebars. …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos