|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502
In this brief and simple guide, learn how to remove and replace the front headlamp bulb on the Benelli TRK 502 motorcycle by following the instructions below. First, place the motorcycle on the centre stand and begin by removing the rubber cover located behind the headlamp, under the instrument panel; then disconnect the electrical connector of the bulb by releasing the metal clip to remove it, as shown in the video. At this point, install the new bulb with the same fitting; refit it securely onto the headlamp and reconnect it!
Updated on 5 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Trk 502
To replace the headlamp bulb on your Benelli TRK 502, unscrew the screws securing the front fairing from the inside, directly behind the handlebars. …
Trk 502
In today's video, we will see how to remove and replace the front headlight bulb on a Benelli TRK 502 in simple and quick steps. First, position your…
Trk 502
In this brief and simple guide, we will see the instructions that will allow you to remove and replace the headlight bulbs on the Benelli TRK 502 mot…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |