|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 135
Today, discover the guide and instructions that will allow you to remove and replace the front brake and clutch levers on the Benelli TNT 135 motorcycle. First, place your motorcycle on a stand and begin by removing the clutch lever; use two spanners to remove the lever pin, disconnecting the clutch cable from it, as shown in the video. At this point, install the new clutch lever by applying the reverse procedure; similarly, replace the front brake lever and finally adjust it!
Updated on 1 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Tnt 135
To replace the clutch on a Benelli TnT 135, loosen the screws that secure the specific cover located on the right side of the bike, near the gear lev…
Tnt 135
In order to replace the clutch of the Benelli TnT 135, you need to loosen the screws that fix the casing located on the right side of the vehicle: on…
Tnt 135
The replacement of the muffler on the Benelli TnT 135 is done by loosening the bolt that secures the muffler to its support at the top, at the rear o…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.124
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |