Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Spark Plug of the Benelli TNT 125

Model: Benelli Tnt 125
Part: Spark plugs

This video is currently unavailable

In this brief and simple guide, follow the steps to remove and replace the spark plug of the Benelli TNT 125 motorcycle. First, place your motorcycle on the stand and disconnect the spark plug connector located on the right side.

Then, use a socket spanner with an extension to unscrew and remove the spark plug, as shown in the video. Now, install the new spark plug of the correct type with the same thread, screwing it in by hand and tightening gently; reconnect the electrical cable and start the engine of your motorcycle!


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Tnt 125 In this video, you will see the main instructions for removing and replacing the engine spark plug on the Benelli TNT 125, in simple steps. First, re…
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
Tnt 125 To dismantle the engine of the Benelli TnT 125, loosen the screws securing the engine block within its housing for complete extraction. Next, loosen …

How to replace the engine oil and oil filter on a Moto Guzzi V7 Stone

Let’s discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Moto Guzzi V7 Stone. First, place the motorcycle on its stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; clean or replace the metal oil filter as shown in the video. At this point, unscrew the oil filler cap and top up the oil; check the level from the side window!

Watch the video!


by ScegliAuto

More videos