Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Xtrainer
Part:

To replace the fork of the Beta Xtrainer, you need to loosen the screws that secure the wheel to its housing, loosening the nuts that are located in the two side parts of the wheel itself: the central pin can then be removed from its seat. Subsequently, you will need to loosen the screws that secure the brake caliper corresponding to its housing, so that it can be detached: once this caliper has been removed, it will also be possible to proceed by unscrewing the screws in the lower and upper part of the fork. The new one can then be inserted, also remounting the wheel.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fork of the Beta Xtrainer?
How do you replace the fork of the Beta Xtrainer?
Xtrainer In order to replace the fork of the Beta Xtrainer, you need to loosen the screws that secure the front wheel to its housing, disconnecting the corres…
How do you replace the fork on the Beta Xtrainer?
How do you replace the fork on the Beta Xtrainer?
Xtrainer On the Beta Xtrainer, the front fork can be replaced by loosening the screws that secure the front wheel to its housing, disconnecting the correspond…
How do you replace the fork of the Beta Xtrainer?
How do you replace the fork of the Beta Xtrainer?
Xtrainer The replacement of the Beta Xtrainer fork is done by loosening the screws that fix the front wheel to its housing: the screws will be located on the …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos