Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the carburetor jets of the Beta RR 125.

Model: Beta Rr 125
Part: Carburetor

Video tutorial

In this guide, we will see the instructions that will allow us to replace the jets of the carburetor on the Beta RR 125. First, let's remove the carburetor from the motorcycle by disconnecting it from the intake manifold. Then, we will unscrew the screws that hold the carburetor float bowl in place, allowing us to access the main and idle jets, as shown in the video.

At this point, we will clean or replace the carburetor jets, and then also replace the float bowl gasket; all that’s left to do is reassemble and reconnect the carburetor.


Posted on 1 January 2026 by ScegliAuto


Related tutorials

Rr 125 Today, follow these instructions to remove and replace the carburettor on the Beta RR 125 enduro bike in simple steps. First, place the bike on a sta…
Rr 125 Begin by sitting on the rider's seat of your Beta RR 125. Next, insert the key into the ignition switch and turn it to activate the instrument panel.…
Rr 125 It will be possible to replace the motor oil of the Beta RR 125 by loosening the drain plug of the oil pan: this will be located in the central lower…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos