Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from the Beta RR 125

Model: Beta Rr 125
Part: Carburetor

Video tutorial

Today, follow these instructions to remove and replace the carburettor on the Beta RR 125 enduro bike in simple steps. First, place the bike on a stand and disconnect the fuel pipe from the tank or carburettor.

Next, disconnect the throttle cable and the air cable, as shown in the video. Now, unscrew the screws on the intake manifold side of the carburettor, gently pulling it out. Then, clean or replace the carburettor with the new one, applying the reverse procedure for reassembly!


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to replace the carburetor jets of the Beta RR 125.
How to replace the carburetor jets of the Beta RR 125.
Rr 125 In this guide, we will see the instructions that will allow us to replace the jets of the carburetor on the Beta RR 125. First, let's remove the carb…
How to Start a Beta RR 125
Rr 125 Begin by sitting on the rider's seat of your Beta RR 125. Next, insert the key into the ignition switch and turn it to activate the instrument panel.…
How to Replace the Front Headlamp Bulb on the Beta RR 125 - RR 300
Rr 125 This guide provides instructions on how to dismantle and replace the front headlamp bulb on the Beta RR 125 enduro bike, as well as the RR 300. First…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos