Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta 350
Part: Engine oil

Engine oil and filter replacement on a Beta 350. Follow this guide to perform the replacement. Position your motorcycle on the original stand; remove the lower fairing (as shown in the video) to access the oil bolt. Use a spanner to unscrew the bolt from the oil sump and drain the fluid into a container. Unscrew the securing screws of the metal filter cap (left side of the engine) where the filter is located. Remove the worn oil filter and fit a new one after cleaning (check the gasket around the metal cap). Finally, top up the new fluid in the engine.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Beta 350?
How to Replace the Clutch on a Beta 350?
350 To replace the clutch on a Beta 350, loosen the screws securing the side casing of the motorcycle near the kickstart lever. Once the casing is remove…
Removing the Alternator Box on Beta 4t 350-500 RRS
Removing the Alternator Box on Beta 4t 350-500 RRS
350 First, unscrew the bolt related to the gear lever using an 8 mm spanner and remove it. Disconnect the duct leading to the stator box by loosening the…
How to do maintenance on the engine of Beta 350RR
How to do maintenance on the engine of Beta 350RR
350 Internal engine cleaning: use a specific additive for internal engine cleaning. Engine oil change: replace the engine oil with a high-quality product…

How to Replace the Brake and Clutch Levers on an Aprilia RS 660

Briefly, here are the steps to remove and replace the front brake and clutch levers on the Aprilia RS 660 motorcycle. First, place your motorcycle on a stand and begin by removing the front brake lever; to do this, unscrew the lever's fixing pin using a socket key, as shown in the video. At this point, install the new lever and adjust its travel; similarly, replace the clutch lever, following the video tutorial to the end for reassembly!

Watch the video!


by ScegliAuto

More videos