Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta 350
Part: Engine

Internal engine cleaning: use a specific additive for internal engine cleaning. Engine oil change: replace the engine oil with a high-quality product suitable for your motorcycle's specifications. For example, you could use Fluip Pro 10w-50 racing supercross nanotech. Gearbox oil change: the gearbox oil should also be replaced with one specific to your motorcycle, such as Fluip Pro 10W40 Racing Bike Nanotech. Chain maintenance: Clean the chain with a dedicated spray, dry it, and apply a nanotechnology anti-friction followed by a ceramic chain grease. Air filter check and cleaning: make sure the air filter is clean and in good condition. Replace it if necessary. Spark plug check: check the spark plugs to ensure they are clean and functioning properly. Replace them if they show signs of wear. Cooling system check: check the coolant level and look for any leaks.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Filter Replacement on a Beta 350
Engine Oil and Filter Replacement on a Beta 350
350 Engine oil and filter replacement on a Beta 350. Follow this guide to perform the replacement. Position your motorcycle on the original stand; remove…
Removing the Alternator Box on Beta 4t 350-500 RRS
Removing the Alternator Box on Beta 4t 350-500 RRS
350 First, unscrew the bolt related to the gear lever using an 8 mm spanner and remove it. Disconnect the duct leading to the stator box by loosening the…
How to Replace the Clutch on a Beta 350?
How to Replace the Clutch on a Beta 350?
350 To replace the clutch on a Beta 350, loosen the screws securing the side casing of the motorcycle near the kickstart lever. Once the casing is remove…

How to Remove the Rear Fairing from a Peugeot Django

This video tutorial will show you how to remove and replace the rear fairing of the Peugeot Django scooter. First, place your scooter on the centre stand and begin by lifting the seat; then unscrew all the fixing screws found under the headlight and at the top, starting to unclip the fairing from the sides as shown in the video. At this point, remove the rear light and disconnect the electrical wiring, completely removing all the rear fairings; then proceed to install the new fairings by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos