|
Do it yourself
| |||
| ||||
Model: Beta Rr 50
In this video tutorial, learn how to remove the rev limiter from a Beta RR 50 in simple steps. First, take a flat screwdriver and unscrew the seat bolt to remove it; then, using a 10 mm socket spanner, unscrew the fixing bolts of the ECU and the voltage regulator. At this point, extract the ECU by pulling the purple lever and removing it; then, disconnect the indicated cable to remove the rev limiter from the vehicle. Finally, refit everything as shown in the video!
Updated on 5 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Rr 50
In today's tutorial, you will learn how to temporarily disable the rev limiter on the Beta RR 50 enduro bike by following the instructions below. Fir…
Rr 50
For illustrative purposes, we will see how to remove the rev limiter of the Beta RR 50 enduro motorcycle; remember not to keep the rev limiter remove…
Rr 50
In this video, you will find instructions that will allow you to dismantle and clean the carburettor on a Beta RR 50 motorcycle. First, remove the se…
|
How to replace the exhaust on a Derbi Atlantis
Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.103
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
