Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, follow the main instructions to remove the exhaust from the Beta 50 RR motorcycle, allowing for its restoration by following these simple steps. Start by removing the exhaust; then, unscrew the fixing bolt of the bracket located near the silencer, and remove the two springs securing the exhaust collector, using something pointed if necessary. Now, unscrew the fixing bolt of the collector bracket using a socket spanner, and remove the exhaust, following the video to the end!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Restoring the Exhaust on a Beta RR 50
Restoring the Exhaust on a Beta RR 50
Rr 50 To remove the exhaust, take off the springs between the cylinder and the exhaust itself, using a wire and pulling them with pliers. There are two spr…
Maintenance of Beta RR 50 Exhaust
Maintenance of Beta RR 50 Exhaust
Rr 50 Today, we will show you some very simple steps for beginner mechanics that will help keep the exhaust of your Beta RR 50 shiny and 'new'. These small…
Replace the Fibreglass on Beta RR 50
Rr 50 In this short video, we will see how to remove and replace the fibreglass inside the silencer of the exhaust on a Beta RR 50 enduro bike. First, remo…

How to Remove the Rear Fairing from a Peugeot Django

This video tutorial will show you how to remove and replace the rear fairing of the Peugeot Django scooter. First, place your scooter on the centre stand and begin by lifting the seat; then unscrew all the fixing screws found under the headlight and at the top, starting to unclip the fairing from the sides as shown in the video. At this point, remove the rear light and disconnect the electrical wiring, completely removing all the rear fairings; then proceed to install the new fairings by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos