Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintenance of Beta RR 50 Exhaust

Model: Beta Rr 50
Part: Checks and maintenance

Video tutorial

Today, we will show you some very simple steps for beginner mechanics that will help keep the exhaust of your Beta RR 50 shiny and 'new'. These small maintenance tasks extend the life of your bike. Use the appropriate tool to unscrew the screws holding the side fairing in place to 'free' the exhaust.

Clean the silencer and apply new lubricant. Unscrew the bracket screw that secures the exhaust so you can move the entire silencer and exhaust area to lubricate and clean it. Reposition the fairing and secure it with the two screws you removed earlier.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Removing the Exhaust on Beta 50 RR
Removing the Exhaust on Beta 50 RR
Rr 50 In this video, follow the main instructions to remove the exhaust from the Beta 50 RR motorcycle, allowing for its restoration by following these sim…
Restoring the Exhaust on a Beta RR 50
Restoring the Exhaust on a Beta RR 50
Rr 50 To remove the exhaust, take off the springs between the cylinder and the exhaust itself, using a wire and pulling them with pliers. There are two spr…
Restoration and Maintenance of the Beta RR 50 Exhaust
Restoration and Maintenance of the Beta RR 50 Exhaust
Rr 50 Before starting this maintenance operation (as should normally be done), place your motorcycle in a stable and secure position. In this case, put it …

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos