Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Restoration and Maintenance of the Beta RR 50 Exhaust

Model: Beta Rr 50
Part: Exhaust muffler

Video tutorial

Before starting this maintenance operation (as should normally be done), place your motorcycle in a stable and secure position. In this case, put it on a stand to ensure the operator's safety.

At this point, dismantle the exhaust by removing the springs and unscrewing the bolts that hold it in place, then pull it out of the inlet. Now, after sanding it down, rework the welds, clean it, and mount it back in position.

To replace the radiator fluid, remove the two clips that hold the hose in place. Place a container underneath and let the old fluid drain out after opening the inlet, into which you will then pour the new fluid.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Removing the Exhaust on Beta 50 RR
Removing the Exhaust on Beta 50 RR
Rr 50 In this video, follow the main instructions to remove the exhaust from the Beta 50 RR motorcycle, allowing for its restoration by following these sim…
Maintenance of Beta RR 50 Exhaust
Maintenance of Beta RR 50 Exhaust
Rr 50 Today, we will show you some very simple steps for beginner mechanics that will help keep the exhaust of your Beta RR 50 shiny and 'new'. These small…
Restoring the Exhaust on a Beta RR 50
Restoring the Exhaust on a Beta RR 50
Rr 50 To remove the exhaust, take off the springs between the cylinder and the exhaust itself, using a wire and pulling them with pliers. There are two spr…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos