Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs on the Beta RR300?

Model: Beta 300rr
Part: Clutch

Video tutorial

To replace the clutch discs on the Beta 300RR, open the cover sealing the clutch casing: this is located on the left side of the bike and you will need to use a pneumatic gun to loosen the bolts securing the casing. Once opened, use the same gun to loosen all the spring pins holding the discs: when the pins are removed, the old discs can be extracted and replaced.

The new discs must be secured with the same pins, and the clutch should be sealed by reinstalling the cover that was removed earlier.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Beta 300RR?
How to Replace the Rear Brake Pads on a Beta 300RR?
300rr To replace the rear brake pads on the Beta 300RR, loosen the screws that secure the caliper to its housing on the rear brake disc. Once the securing …
How to Replace the Rear Brake Pads of the Beta 300RR?
How to Replace the Rear Brake Pads of the Beta 300RR?
300rr To replace the rear brake pads of the Beta 300RR, loosen the screws that secure it to the housing on the rear brake disc. Once these securing screws …
How to Remove the Rear Shock Absorber from the Beta 300RR?
How to Remove the Rear Shock Absorber from the Beta 300RR?
300rr To replace the rear shock absorber on the Beta 300RR, you need to loosen the bolts that secure it at both the top and bottom. Once these are loosened…

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?

In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key but keep it in the initial position, then press and hold the "SET" button located at the bottom right of the dashboard, and simultaneously turn on the instrument panel. At this point, hold the button for about 3 seconds, or for as long as necessary for the service to reset correctly.

Watch the video!


by ScegliAuto

More videos