Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr S 500

Let’s look at the guide on how to remove the stator from the Beta RR-S 500 enduro bike by following these simple and quick steps. First, place your bike on a stand and start by unscrewing all the fixing screws on the stator cover; however, first remove the metal shield located under the engine by unscrewing the screws. At this point, unscrew the screws of the stator to remove it, disconnecting its electrical wiring; if necessary, replace the stator and reassemble everything by applying the reverse procedure!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Coolant in the Beta 500 RR-S
Replacing the Coolant in the Beta 500 RR-S
Rr S 500 .. the old coolant or antifreeze in the Beta RR-S 500 enduro motorcycle. First, unscrew the drain screw for the coolant, located on the casing of the.. …
Engine Oil Change for the Beta RR-S 500
Rr S 500 .. the engine oil and oil filter on the Beta RR-S 500 enduro bike. First, warm up the engine for a few minutes and remove the oil drain bolt located.. …
How to Replace the Tank on Beta RR-S 500?
How to Replace the Tank on Beta RR-S 500?
Rr S 500 .. To replace the tank on the Beta RR-S 500, you need to loosen the bolts securing the side panels of the bike, located on the front side parts... …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos