Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see the procedure necessary to replace the old coolant or antifreeze in the Beta RR-S 500 enduro motorcycle. First, unscrew the drain screw for the coolant, located on the casing of the fluid pump, to completely drain the old fluid; then open the filler hole of the radiator by unscrewing the cap. At this point, pour in the new coolant, suitable for your radiator; fill to the maximum level, then start the engine.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the stator from the Beta RR-S 500
How to remove the stator from the Beta RR-S 500
Rr S 500 Let’s look at the guide on how to remove the stator from the Beta RR-S 500 enduro bike by following these simple and quick steps. First, place your b…
Engine Oil Change for the Beta RR-S 500
Rr S 500 This video outlines the main instructions for changing the engine oil and oil filter on the Beta RR-S 500 enduro bike. First, warm up the engine for …
How to Replace the Tank on Beta RR-S 500?
How to Replace the Tank on Beta RR-S 500?
Rr S 500 To replace the tank on the Beta RR-S 500, you need to loosen the bolts securing the side panels of the bike, located on the front side parts. Once th…

How to Change the Engine Oil on a Ducati Hypermotard?

You can change the engine oil on a Ducati Hypermotard by loosening the drain plug located at the central lower part of the bike: once the plug is unscrewed, you can let the used oil flow completely into a container placed underneath. Once the plug has been removed, you can proceed by sliding the oil filter out of its seat to insert the new one; at this point, you can continue with the top-up, pouring the necessary amount of oil through the breather on the left side of the bike.

Watch the video!


by ScegliAuto

More videos