Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change for the Beta RR-S 500

Model: Beta Rr S 500
Part: Engine oil

This video is currently unavailable

This video outlines the main instructions for changing the engine oil and oil filter on the Beta RR-S 500 enduro bike. First, warm up the engine for a few minutes and remove the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Then, remove the oil filter cartridge by taking off the side cover (using a socket spanner). At this point, insert the new oil filter and open the fill hole to pour in the new oil!


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Replacing the Coolant in the Beta 500 RR-S
Replacing the Coolant in the Beta 500 RR-S
Rr S 500 .. the old coolant or antifreeze in the Beta RR-S 500 enduro motorcycle. First, unscrew the drain screw for the coolant, located on the casing of the.. …
How to remove the stator from the Beta RR-S 500
How to remove the stator from the Beta RR-S 500
Rr S 500 ..n how to remove the stator from the Beta RR-S 500 enduro bike by following these simple and quick steps. First, place your bike on a stand and start b.. …
How to Replace the Tank on Beta RR-S 500?
How to Replace the Tank on Beta RR-S 500?
Rr S 500 .. To replace the tank on the Beta RR-S 500, you need to loosen the bolts securing the side panels of the bike, located on the front side parts... …

How to remove the panels of the Peugeot Kisbee

In this short and simple guide, you will see how to remove the plastic panels of the Peugeot Kisbee scooter, following the instructions provided below. First, place your scooter on the centre stand and begin by lifting the rider's seat; then, unscrew the fixing screws found in the under-seat compartment and under the footboard, subsequently removing the panels as shown in the video. At this point, unscrew the screws of the footboard to remove it, then remove the front shield (disconnecting the electrical connectors as well); finally, reassemble everything by applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos