Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Beta RR 50, you need to loosen the screws that secure the side panel on the right side of the bike, at the rear. Once these screws are loosened, you can then loosen the screws that secure the exhaust at the rear support and subsequently the one that secures the mounting ring. When this mounting ring is removed, you can slide the exhaust off the remaining part of the exhaust pipe, allowing you to install the new replacement part.

Updated on 20 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Restoring the Exhaust on a Beta RR 50
Restoring the Exhaust on a Beta RR 50
Rr 50 To remove the exhaust, take off the springs between the cylinder and the exhaust itself, using a wire and pulling them with pliers. There are two spr…
How to replace the exhaust on the Beta RR 50?
How to replace the exhaust on the Beta RR 50?
Rr 50 You can replace the exhaust on the Beta RR 50 by loosening the screws that secure the exhaust terminal to its housing, located near the rear wheel on…
Removing the Exhaust on Beta 50 RR
Removing the Exhaust on Beta 50 RR
Rr 50 In this video, follow the main instructions to remove the exhaust from the Beta 50 RR motorcycle, allowing for its restoration by following these sim…

How to Reset the Oil Light on the Honda Forza 300

To reset the oil light on the Honda Forza 300, follow this procedure: first, turn off the engine. Once the engine is off, press and hold the right button in the centre of the dashboard. While holding the button, turn the key to position 2 to power on the dashboard and hold for 3 seconds. At this point, the oil light reset has been successful. You can then turn off and restart the engine to confirm. No tools are needed, and the process will take 1 minute.

Watch the video!


by ScegliAuto

More videos