Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 50
Part: Light bulb

To replace the front indicator bulb on the Beta RR 50, first remove the screw that secures the corresponding headlamp at the front of the motorcycle. Once this screw is loosened, detach the headlamp by disconnecting its connector. This will allow you to extract the bulb from its housing and insert a new one. After positioning the new bulb, reconnect the headlamp and secure it in place with the corresponding screw.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine from the Beta RR 50?
How to Remove the Engine from the Beta RR 50?
Rr 50 To remove the engine from the Beta RR 50, first disconnect the exhaust pipe located at the front of the compartment, just behind the front wheel. Nex…
Replacing the Number Plate Holder on Beta RR 50
Replacing the Number Plate Holder on Beta RR 50
Rr 50 In this video, we will see how to disassemble and replace the number plate holder on a Beta RR 50 motorcycle in simple steps. First, unscrew the fixi…
How do you replace the transmission of the Beta RR 50?
How do you replace the transmission of the Beta RR 50?
Rr 50 In order to replace the transmission of the Beta RR 50, you need to loosen the central nuts that fix the sprockets around which the chain is placed: …

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos