Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 50
Part: Engine

To remove the engine from the Beta RR 50, first disconnect the exhaust pipe located at the front of the compartment, just behind the front wheel. Next, disconnect all cables connected to the top of the engine cylinder, including removing the spark plug. After this, you can unscrew the bolts securing the left side casing of the engine, giving access to the underlying stator. Once this is removed, along with the last bolts securing the engine to its mounts, you can extract it from its compartment.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Beta RR 50
How to Start a Beta RR 50
Rr 50 Before starting, sit on the seat of your Beta RR 50. First, open the fuel tap. Then, insert the key into the ignition switch and turn it clockwise. O…
How to Remove the Rear Wheel of a Beta RR50
How to Remove the Rear Wheel of a Beta RR50
Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…
How to disconnect the rev limiter cable of the Beta RR 50
How to disconnect the rev limiter cable of the Beta RR 50
Rr 50 For illustrative purposes, we will see how to remove the rev limiter of the Beta RR 50 enduro motorcycle; remember not to keep the rev limiter remove…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos