Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Beta 300RR?

Model: Beta 300rr
Part: Engine oil

Video tutorial

To change the engine oil on your Beta 300RR, first ensure the engine is cold. Position the bike on a flat and stable surface.

Remove the oil cap on the side of the engine and place a container under the oil drain plug. Remove the drain plug and allow the used oil to completely drain.

Check and replace any damaged seals. Tighten the drain plug securely.

Fill the engine with the recommended oil until it reaches the correct level. Refit the oil cap and start the engine to allow the oil to circulate.

Turn off the engine and check the oil level using the dipstick. Add oil if necessary and close the oil cover.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Replace the Fork on a Beta 300RR
How to Replace the Fork on a Beta 300RR
300rr To replace the fork on the Beta 300RR, loosen the bolts securing the front wheel of the motorcycle so that it can be removed after disconnecting the …
How to Replace the Rear Brake Pads on a Beta 300RR?
How to Replace the Rear Brake Pads on a Beta 300RR?
300rr To replace the rear brake pads on the Beta 300RR, loosen the screws that secure the caliper to its housing on the rear brake disc. Once the securing …
How to Remove the Rear Shock Absorber from the Beta 300RR?
How to Remove the Rear Shock Absorber from the Beta 300RR?
300rr To replace the rear shock absorber on the Beta 300RR, you need to loosen the bolts that secure it at both the top and bottom. Once these are loosened…

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos