Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta 300rr
Part: Bearing

In order to replace the rear wheel bearing of the Beta RR 300, you need to loosen the nut that secures the central axle of the rear wheel of the motorcycle, so that the wheel can be removed from its housing. Once the wheel has been removed, you can also unscrew the screws that secure the brake caliper, remove it, and set the wheel aside. The bearing at its center can be removed by pushing it outwards or removing it with a puller; after removal, you can insert the new replacement piece, reassembling all the components.

Posted on 13 May 2024 by ScegliAuto

Video tutorial

Related tutorials

300rr The replacement of the rear brake pads of the Beta 300RR can be carried out by loosening the screws that fix it to the corresponding housing, which i…
300rr To replace the rear shock absorber on the Beta 300RR, you need to loosen the bolts that secure it at both the top and bottom. Once these are loosened…
300rr To replace the fork on the Beta 300RR, loosen the bolts securing the front wheel of the motorcycle so that it can be removed after disconnecting the …

How to Change the Engine Oil on a Ducati Hypermotard?

You can change the engine oil on a Ducati Hypermotard by loosening the drain plug located at the central lower part of the bike: once the plug is unscrewed, you can let the used oil flow completely into a container placed underneath. Once the plug has been removed, you can proceed by sliding the oil filter out of its seat to insert the new one; at this point, you can continue with the top-up, pouring the necessary amount of oil through the breather on the left side of the bike.

Watch the video!


by ScegliAuto

More videos