|
Do it yourself
| |||
| ||||
This video is currently unavailable
To replace the clutch on a BMW K100, you must completely remove the engine block from its housing. Once all the screws securing it are removed, you can proceed to remove the gearbox from the front of the engine block. In the area between the engine block and the gearbox, you will find the flywheel and clutch; the latter can now be removed from its seat by inserting the new one, and then reassemble all previously removed components.
Updated on 22 October 2026 by ScegliAuto
Related tutorials
K100
To replace the clutch on a BMW K100, you need to loosen all the screws securing the clutch cover, which is located at the central lower part of the b…
K100
Before you can start, position your BMW K100 on its side stand. Begin by inserting the key into the ignition switch and turning it clockwise. Next, o…
K100
To replace the exhaust on a BMW K100, loosen the screws that secure the exhaust terminal to its supports: these are located on the left side of the b…
|
How to Replace the Clutch Discs on a Kawasaki Z1000?
Here are the brief instructions for removing and replacing the clutch discs on a Kawasaki Z1000 motorcycle. First, place the motorcycle on a stand and begin draining the engine oil by unscrewing the oil drain bolt located under the engine; then unscrew the fixing screws of the clutch cover to access the clutch, as shown in the video. At this point, unscrew the screws of the clutch pack, removing all the discs; replace and install the new original clutch discs, alternating the cork discs with the metal ones! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
