Do it yourself
Frequently asked questions about cars and motorcycles

How to Start a BMW K100

Model: Bmw K100
Part: Checks and maintenance

Video tutorial

Before you can start, position your BMW K100 on its side stand. Begin by inserting the key into the ignition switch and turning it clockwise.

Next, open the fuel tap located beneath the rider's seat. After this, pull and hold the clutch lever, then press and hold the starter button located beneath the throttle grip.

Keep it pressed until the engine starts. When the engine is running, you can release the starter button and the clutch lever, completing the procedure.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

K100 To replace the exhaust on a BMW K100, loosen the screws that secure the exhaust terminal to its supports: these are located on the left side of the b…
K100 In order to replace the rear shock absorber on the BMW K100, you need to loosen the screws that secure the replacement piece to its housing, both at …
K100 In order to replace the battery of the BMW K100, you will need to loosen the screws that secure the motorcycle seat to its housing, so that it can be…

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos