Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The instructions in this guide will show us how to disassemble and replace the low beam and high beam bulb of the front headlight and the position bulbs of the BMW S1000 RR motorcycle. First, we put our motorcycle on the stand and start by removing the plastic cap of the bulbs found at the top, behind the headlight; then we remove the position bulbs to replace them with new ones, as shown in the video. Similarly, we will remove the other cap to disassemble and replace the low beam and high beam bulb, following the video tutorial until the end!

Posted on 22 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a BMW S1000 RR
How to Replace the Front Headlight Bulb on a BMW S1000 RR
S1000 Rr This brief guide outlines the steps to remove and replace the front headlight bulb on the BMW S1000 RR motorcycle, following the instructions below. …
How to replace the headlight bulbs on the BMW S1000 RR?
S1000 Rr As shown in this tutorial, replacing the headlight bulbs on the BMW S1000 RR is an extremely simple and quick operation. Before proceeding, ensure th…
How to disassemble the front wheel on the BMW S1000 RR
How to disassemble the front wheel on the BMW S1000 RR
S1000 Rr In this tutorial we can see how to disassemble the front wheel on the BMW S1000 RR, an extremely simple and fast operation. First of all, position yo…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos