Do it yourself
Frequently asked questions about cars and motorcycles
This brief guide outlines the steps to remove and replace the front headlight bulb on the BMW S1000 RR motorcycle, following the instructions below. First, move to the front of your motorcycle and begin by removing the plastic cover located behind the headlamp. Disconnect the electrical connector from the bulb and unclip the metal spring to remove it, as shown in the video. At this point, install the new bulb of the correct type and with the same fitting. Then, reassemble everything by reversing the procedure!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

S1000 Rr The instructions in this guide will show us how to disassemble and replace the low beam and high beam bulb of the front headlight and the position bu…
S1000 Rr As shown in this tutorial, replacing the headlight bulbs on the BMW S1000 RR is an extremely simple and quick operation. Before proceeding, ensure th…
S1000 Rr In this tutorial we can see how to disassemble the front wheel on the BMW S1000 RR, an extremely simple and fast operation. First of all, position yo…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos