Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulbs on the BMW S1000 RR?

Model: Bmw S1000 Rr
Part: Headlight bulb

This video is currently unavailable

As shown in this tutorial, replacing the headlight bulbs on the BMW S1000 RR is an extremely simple and quick operation. Before proceeding, ensure the key is not inserted for safety.

Start by positioning yourself at the back of the headlight in question, then locate and remove the circular cap. Next, disconnect the power connector, unclip the metal clip, and remove the bulb from the housing. Finally, insert the replacement, reassemble everything, and repeat the operation for the opposite side if necessary.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulbs of the BMW S1000 RR
How to replace the front headlight bulbs of the BMW S1000 RR
S1000 Rr The instructions in this guide will show us how to disassemble and replace the low beam and high beam bulb of the front headlight and the position bu…
How to Replace the Front Headlight Bulb on a BMW S1000 RR
How to Replace the Front Headlight Bulb on a BMW S1000 RR
S1000 Rr This brief guide outlines the steps to remove and replace the front headlight bulb on the BMW S1000 RR motorcycle, following the instructions below. …
How to reset the Service light on the BMW S1000 RR?
How to reset the Service light on the BMW S1000 RR?
S1000 Rr To reset the Service light on the BMW S1000 RR, connect a diagnostic tool to the OBD port of the motorcycle: the OBD port is located at the rear, nea…

How to replace the air filter of the Sym Sport Rider 125?

You can replace the air filter of the Sym Sport Rider 125 by loosening the screws that secure the inner cover panel of the front wheel arch of the motorcycle: once this panel is freed, you can locate the underlying filter box, which must be opened to remove the corresponding filter inside. Once the old filter is removed, you can proceed to place the new one in its housing: you can then close everything, verifying that it functions correctly.

Watch the video!


by ScegliAuto

More videos