Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw F800gs
Part: Engine oil

As shown in the video, the bolt to unscrew for oil drainage is located on the left side of the engine and therefore the bike. Remove the small fairing of this bolt for better access. It is advisable to perform the procedure after running the engine for a few minutes, warming the circulating oil which will become a bit more fluid. Unscrew the 10 mm bolt and collect the used lubricant in a container. While this is happening, unscrew the oil filter located at the front of the engine. Lubricate the new filter before inserting it and fill the lubricant through the upper hole.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Perform the Service (Oil and Oil Filter Change) on a BMW F800 GS
How to Perform the Service (Oil and Oil Filter Change) on a BMW F800 GS
F800gs Today, we will see in this tutorial video how to carry out the regular service maintenance by replacing the engine oil and oil filter on a BMW F800 G…
How to Replace the Engine Oil and Oil Filter on the BMW F800 GS
How to Replace the Engine Oil and Oil Filter on the BMW F800 GS
F800gs This guide provides instructions on how to perform routine maintenance by replacing the engine oil and oil filter on the BMW F800 GS. First, place yo…
How to Change the Engine Oil and Oil Filter on a BMW F800 GS
How to Change the Engine Oil and Oil Filter on a BMW F800 GS
F800gs In today’s video, you will see how to perform routine maintenance by changing the engine oil and oil filter on a BMW F800 GS motorcycle. First, posit…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos