|
Do it yourself
| |||
| ||||
Model: Bmw F800 R
To replace the engine oil of the BMW F800R, unscrew the reservoir cap using a spanner, as shown in the video. It is advisable to place a tray or container under the cap to collect the flowing oil. At this point, remove the oil filter following the steps shown in the video. Lubricate the new part and refit it, followed by the drain plug. Now, insert the new oil: for this motorcycle model, top up with 2.9 litres of 15W50 synthetic engine oil.
Updated on 19 April 2026 by ScegliAuto
Video tutorial
Related tutorials
F800 R
Today, discover the necessary guide that will show you how to perform the routine maintenance service by replacing the engine oil and oil filter of t…
F800 R
In this tutorial, see how to change the engine oil in the BMW F800 R, a very simple and quick operation. First, ensure the engine is sufficiently coo…
F800 R
This guide provides instructions for draining and refilling the coolant or antifreeze in the BMW F800 R motorcycle, as well as the F800 GS. First, pl…
|
How to Remove the Rear Wheel on the BMW G650 GS?
In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
