Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear transmission oil on the BMW K1600 GTL

Model: Bmw K1600 Gtl
Part: Transmission fluid

Video tutorial

In this video, discover how to change the rear transmission oil on the BMW K1600 GTL motorcycle by following these simple steps. First, position the stand on your motorcycle and start by removing the rear wheel by unscrewing the central bolts; then unscrew the oil drain bolt using a Torx spanner, as shown in the video.

After draining all the oil into a container, pour in the new oil with a funnel, ensuring it has the correct specifications (about 300 ml will be required). Then reassemble everything!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the BMW K1600 GTL
How to Replace the Air Filter on the BMW K1600 GTL
K1600 Gtl To replace the air filter on the BMW K1600 GTL, loosen the screws that secure the side panels near the fuel tank: once these are completely detached,…
How to Replace the Headlight Bulb on the BMW K1600 GTL?
How to Replace the Headlight Bulb on the BMW K1600 GTL?
K1600 Gtl To replace the headlight bulb on the BMW K1600 GTL, loosen the screws securing the headlight fairing. Once these screws, located on the sides of the …
How to Replace the Horn on a BMW K1600 GTL?
How to Replace the Horn on a BMW K1600 GTL?
K1600 Gtl To replace the horn on a BMW K1600 GTL, you need to loosen the screws that secure the left front fairing, so that it can be detached from its housing…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos